Wednesday, 12 March 2014

ALL Remote Tester Circuit

Description.

This is a simple remote controller tester circuit  based on infrared sensor IC TSOP 1738. TSOP 1836.etc When the IR waves fall on the sensor it output changes to low state.This makes the transistor Q1 ON and LED will blink according to the code contained in the signal. So for press of each button the LED blinks in different ways. This is a good indication of the working of remote.

                                                                            Remote Tester Circuit

Notes .

 This circuit can be used to test remotes operating in the 38Khz carrier frequency.Almost all remotes fall into this category so no problem.

 Examples

TV remote,USB & AC and others

Sensor Type

Following the specification of component
 Transistor BC557,BC556
TSOP 1736 Sensor Infra Red
R1 = 330 ohm ¼ watt Resistor
R2 = 10k ohm ¼ watt Resistor
R3 = 1k ohm ¼ watt Resistor
led

Transistor BC557 data sheet


FEATURES

Low current (max. 100mA)
Low voltage (max. 65V).

APPLICATIONS

General purpose switching and amplification.

DESCRIPTION

PNP transistor in a TO-92; SOT54 plastic package. 
BC557 Pin


Please try I am sure 100% will be successful.